Grab Iron Ends (Nut/Bolt): O Scale
$3.95
These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Nut/Bolt that attached a hand grab to a car. The bolt is a scale 5/8″ with the nut 1/8″.
The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.
- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.
ACC glue works well for all our resin parts.
Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000, but any good thin primer will work.
All parts come unpainted.
Related products
-
Caboose Steps B
Caboose 2 steps with holes. Standard caboose steps, holes in steps. 2” 9” wide. Set of four for one caboose.
- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts …
- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts …
-
RGS Relay Cabinet #2 Kit: O Scale
From the catalogs of the General Railway Supply Company these type of cabinets go back to at least the 1920’s. Used alone for track circuits or crossing and train signals, they were used all over and many can still be seen today. Tall version single door.
There may be some minor sanding needed on the parts. We removed all the supports, …
-
Grab Iron Double Rivet for Caboose: O Scale
This is a double rivet grab iron end used on many cabooses. See image. May other uses as well such roof top grabs.
The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.- Many of our parts come with supports still …
- Many of our parts come with supports still …
-
Deco Box Car Ends: O Scale
These distinctive ends were used by the C&O and the B&O. Our ends are sized to fit O-Scale InterMountain 1937 AAR box cars.
Two per package.The instructions below show the end being mounted on an An S Scale America 1937 AAR Box Car. The process in the same for the O Scale InterMountain 1937 AAR Box Car.
The S Scale version is …