Freight Car Parts

Showing all 7 results

  • Grab Iron Ends (Nut/Bolt): O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Nut/Bolt that attached a hand grab to a car. The bolt is a scale 5/8″ with the nut 1/8″.

    The stem is .020 and designed for .015 wire. There are 17 parts per sprue …

    $3.95

  • Grab Iron Ends (Rivet): O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Rivet design that attached a hand grab to newer metal cars.

    The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

    • <span ...

    $3.95

  • Air Hose w/Angle Cock & Glad Hand: O Scale

    This resin has some flex and will not crack when pressure is applied. These take paint well after priming. We normally use Mr. Primer Surfacer 1000, but any good thin primer will work.
    12 pieces per package or enough for 6 cars / locomotives.

    NOTE: This is NOT offered in black resin because to add any type of rust color to the …

    $3.95

  • Deco Box Car Ends: O Scale

    These distinctive ends were used by the C&O and the B&O. Our ends are sized to fit O-Scale InterMountain 1937 AAR box cars.
    Two per package.

    The instructions below show the end being mounted on an An S Scale America 1937 AAR Box Car. The process in the same for the O Scale InterMountain 1937 AAR Box Car.

    The S Scale version is …

    $6.95

  • Grab Iron Double Nut/Bolt for Caboose: O Scale

    This is a double Nut/Bolt grab iron end used on many cabooses. See image. May other uses as well such roof top grabs.
    The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

    • Many of our parts come with supports still …

    $3.95

  • Grab Iron Double Rivet for Caboose: O Scale

    This is a double rivet grab iron end used on many cabooses. See image. May other uses as well such roof top grabs.
    The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

    • Many of our parts come with supports still …

    $3.95

  • Grab Iron Ends Square Nut: O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the square nut that attached a hand grab to older wooden cars. The bolt is a scale 5/8″ with the nut 1/8″.

    The stem is .020 and designed for .015 wire. There are 17 parts …

    $3.95