O Scale Items

Showing 1–8 of 22 results

  • BUDA No. 30 Clamp Type Steel Bumping Post: O Scale

    The Buda No. 30 track bumper was used on North American railroads. They could be found all over, on customer sidings, yards and more. Our kit includes the clamping parts to attach to the rail. Designed for code 100 track, however, larger codes may be used by removing or filing the pieces. Once glued and ballasted in place you will …

    $8.95

  • Grab Iron Ends (Nut/Bolt): O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Nut/Bolt that attached a hand grab to a car. The bolt is a scale 5/8″ with the nut 1/8″.

    The stem is .020 and designed for .015 wire. There are 17 parts per sprue …

    $3.95

  • Air Hose w/Angle Cock & Glad Hand: O Scale

    This resin has some flex and will not crack when pressure is applied. These take paint well after priming. We normally use Mr. Primer Surfacer 1000, but any good thin primer will work.
    12 pieces per package or enough for 6 cars / locomotives.

    NOTE: This is NOT offered in black resin because to add any type of rust color to the …

    $3.95

  • Grab Iron Ends (Rivet): O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Rivet design that attached a hand grab to newer metal cars.

    The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

    • <span ...

    $3.95

  • AAR B Truck Wiper Blocks: O Scale

    These wiper blocks were designed for the Central Locomotive Workshop AAR B truck but will find many other uses. Ships with 4 blocks made from a nylon resin. This resin taps and drills, sands, cuts and glues like a dream.
    Wipers are not included but we used .003 Hard …

    $4.95

  • Control Hose Bracket and Signal Lines: O Scale

    Based on manufacturer’s drawings. You will receive 4 brackets and 16 signal lines. They can be bolted onto the locomotive itself or using some type of easy to make bracket. Most modern locomotives allow for four lines, however, some used three.  See the sample photos. Simply cut off one opening and lightly sand. The signal lines are …

    $5.95

  • Locomotive Ditch Lights: O Scale

    Based on manufacturer’s drawings. You will receive 8 lamp assemblies, enough for two locomotives.  As seen in the accompanying pictures, they can be bolted onto the locomotive itself or using some type of easy to make bracket. The bracket is up to you. A few bits of brass or styrene and you’re done. Also seen here are models by Brian …

    $4.95

  • Grab Iron Double Nut/Bolt for Caboose: O Scale

    This is a double Nut/Bolt grab iron end used on many cabooses. See image. May other uses as well such roof top grabs.
    The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

    • Many of our parts come with supports still …

    $3.95