Air Hose w/Angle Cock & Glad Hand: O Scale

$3.95

This resin has some flex and will not crack when pressure is applied. These take paint well after priming. We normally use Mr. Primer Surfacer 1000, but any good thin primer will work.
12 pieces per package or enough for 6 cars / locomotives.

NOTE: This is NOT offered in black resin because to add any type of rust color to the black for the angle cock and glad hand is difficult; therefore, we went with a more neutral color.

 

  • Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.
    ACC glue works well for all our resin parts.
    Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000, but any good thin primer will work.
    All parts come unpainted.
SKU: O/Freight/AH Categories: , ,

Related products

  • Grab Iron Double Rivet for Caboose: O Scale

    This is a double rivet grab iron end used on many cabooses. See image. May other uses as well such roof top grabs.
    The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

    • Many of our parts come with supports still …

    $3.95

  • Grab Iron Ends Square Nut: O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the square nut that attached a hand grab to older wooden cars. The bolt is a scale 5/8″ with the nut 1/8″.

    The stem is .020 and designed for .015 wire. There are 17 parts …

    $3.95

  • GRS Signal SA1 Kit: O Scale

    Shown above set up as a home signal.

    From the catalogs of the General Railway Supply Company the SA1.

    The Type SA Signal produces a powerful signal indication at a minimum of energy consumption due to its scientific optical construction. It is equipped with an elliptical reflector which uses approximately …

    $19.95

  • Grab Iron Double Nut/Bolt for Caboose: O Scale

    This is a double Nut/Bolt grab iron end used on many cabooses. See image. May other uses as well such roof top grabs.
    The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

    • Many of our parts come with supports still …

    $3.95