Caboose Steps A
$5.99
Caboose 3 steps with tread. Standard caboose steps ,See photos for dimensions. Set of four for one caboose.
- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.
ACC glue works well for all our resin parts.
Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000, but any good thin primer will work.
All parts come unpainted.
Related products
Deco Box Car Ends: O Scale
These distinctive ends were used by the C&O and the B&O. Our ends are sized to fit O-Scale InterMountain 1937 AAR box cars.
Two per package.The instructions below show the end being mounted on an An S Scale America 1937 AAR Box Car. The process in the same for the O Scale InterMountain 1937 AAR Box Car.
The S Scale version is …
Air Hose w/Angle Cock & Glad Hand: O Scale
This resin has some flex and will not crack when pressure is applied. These take paint well after priming. We normally use Mr. Primer Surfacer 1000, but any good thin primer will work.
12 pieces per package or enough for 6 cars / locomotives.NOTE: This is NOT offered in black resin because to add any type of rust color to the …
Caboose Steps B
Caboose 2 steps with holes. Standard caboose steps, holes in steps. 2” 9” wide. Set of four for one caboose.
- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts …
- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts …