Grab Iron Ends Square Nut: O Scale
These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the square nut that attached a hand grab to older wooden cars. The bolt is a scale 5/8″ with the nut 1/8″.
The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.
- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.
ACC glue works well for all our resin parts.
Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000, but any good thin primer will work.
All parts come unpainted.