AAR B Truck Wiper Blocks: O Scale

$4.95

These wiper blocks were designed for the Central Locomotive Workshop AAR B truck but will find many other uses. Ships with 4 blocks made from a nylon resin. This resin taps and drills, sands, cuts and glues like a dream.
Wipers are not included but we used .003 Hard Phosphor Bronze from Clover House. You can check their full Website here.

 

  • Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.
    ACC glue works well for all our resin parts.
    Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000, but any good thin primer will work.
    All parts come unpainted.
SKU: O/Loco/Wiper Category:

Related products

  • Locomotive Ditch Lights: O Scale

    Based on manufacturer’s drawings. You will receive 8 lamp assemblies, enough for two locomotives.  As seen in the accompanying pictures, they can be bolted onto the locomotive itself or using some type of easy to make bracket. The bracket is up to you. A few bits of brass or styrene and you’re done. Also seen here are models by Brian …

    $4.95

  • Air Hose w/Angle Cock & Glad Hand: O Scale

    This resin has some flex and will not crack when pressure is applied. These take paint well after priming. We normally use Mr. Primer Surfacer 1000, but any good thin primer will work.
    12 pieces per package or enough for 6 cars / locomotives.

    NOTE: This is NOT offered in black resin because to add any type of rust color to the …

    $3.95

  • MU Housings: O Scale

    Based on manufacturer’s drawings. You will receive 8 assemblies, enough for two locomotives.  They can be bolted onto the locomotive itself or using some type of easy to make bracket. The bracket is up to you. A few bits of brass or styrene, and you’re  done.

    • Many of our parts …

    $4.95

  • Control Hose Bracket and Signal Lines: O Scale

    Based on manufacturer’s drawings. You will receive 4 brackets and 16 signal lines. They can be bolted onto the locomotive itself or using some type of easy to make bracket. Most modern locomotives allow for four lines, however, some used three.  See the sample photos. Simply cut off one opening and lightly sand. The signal lines are …

    $5.95