Grab Iron Ends (Nut/Bolt): O Scale
$3.95
These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Nut/Bolt that attached a hand grab to a car. The bolt is a scale 5/8″ with the nut 1/8″.
The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.
- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.
ACC glue works well for all our resin parts.
Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000, but any good thin primer will work.
All parts come unpainted.
Related products
-
Grab Iron Ends (Rivet): O Scale
These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Rivet design that attached a hand grab to newer metal cars.
The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.
- <span ...
- <span ...
-
Grab Iron Double Rivet for Caboose: O Scale
This is a double rivet grab iron end used on many cabooses. See image. May other uses as well such roof top grabs.
The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.- Many of our parts come with supports still …
- Many of our parts come with supports still …
-
GRS Signal SA1 Head Only Kit: O Scale
From the catalogs of the General Railway Supply Company the SA1.
The Type SA Signal produces a powerful signal indication at a minimum of energy consumption due to its scientific optical construction. It is equipped with an elliptical reflector which uses approximately 80 per cent of light emitted by the concentrated filament lamp. All three indications are projected through one lens, …
-
RGS Relay Cabinet #1 Kit: O Scale
From the catalogs of the General Railway Supply Company these type of cabinets go back to at least the 1920’s. Used alone for track circuits or crossing and train signals, they were used all over and many can still be seen today. Short version single door.
There may be some minor sanding needed on the parts. We removed all the supports, …