Grab Iron Double Rivet for Caboose: O Scale

$3.95

This is a double rivet grab iron end used on many cabooses. See image. May other uses as well such roof top grabs.
The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

  • Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.
    ACC glue works well for all our resin parts.
    Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000, but any good thin primer will work.
    All parts come unpainted.
SKU: O/Freight/DR Category:

Related products

  • Caboose Steps A

    Caboose 3 steps with tread. Standard caboose steps , <span class="x193iq5w xeuugli x13faqbe x1vvkbs x1xmvt09 x1lliihq x1s928wv xhkezso x1gmr53x x1cpjm7i x1fgarty x1943h6x xudqn12 ...

    $5.99

  • Grab Iron Ends (Nut/Bolt): O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Nut/Bolt that attached a hand grab to a car. The bolt is a scale 5/8″ with the nut 1/8″.

    The stem is .020 and designed for .015 wire. There are 17 parts per sprue …

    $3.95

  • Grab Iron Ends (Rivet): O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Rivet design that attached a hand grab to newer metal cars.

    The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

    Many of …

    $3.95

  • Grab Iron Double Nut/Bolt for Caboose: O Scale

    This is a double Nut/Bolt grab iron end used on many cabooses. See image. May other uses as well such roof top grabs.
    The stem is .020 and designed for .015 wire. There are 17 parts per sprue and four sprues per package.

    • Many of our parts come with supports still …

    $3.95