Locomotive Ditch Lights: O Scale


Based on manufacturer’s drawings. You will receive 8 lamp assemblies, enough for two locomotives.  As seen in the accompanying pictures, they can be bolted onto the locomotive itself or using some type of easy to make bracket. The bracket is up to you. A few bits of brass or styrene and you’re done. Also seen here are models by Brian Huang using these castings. I used a warm white 402 or 603 LED and then canopy glue or Aleene’s Clear Gel Tacky Glue for the lens.


  • Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.
    ACC glue works well for all our resin parts.
    Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000, but any good thin primer will work.
    All parts come unpainted.
SKU: O/Loco/Ditch Category: