O Scale Items

  • Grab Iron Ends Square Nut: O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the square nut that attached a hand grab to older wooden cars. The bolt is a scale 5/8″ with the nut 1/8″.

    The stem is .020 and …

    $4.00

  • MU Housings: O Scale

    Based on manufacturer’s drawings. You will receive 8 assemblies, enough for two locomotives.  They can be bolted onto the locomotive itself or using some type of easy to make bracket. The bracket is up to you. A few bits of brass or styrene, and you’re  done.

    • Many of …

    $5.00

  • Propane Tank 250 Gallon: O Scale

    Not only for modern day homes and business, this will also go nicely with track heaters that are used outside of yards and on the main. Scaled from manufacturer’s drawings.

    • Many of our parts come with supports still attached, and will need to be carefully cut. We always …

    $6.00

  • AAR B Truck Wiper Blocks

    These wiper blocks were designed for the Central Locomotive Workshop AAR B truck but will find many other uses. Ships with 4 blocks made from a nylon resin. This resin taps and drills, sands, cuts and glues like a dream.

    Wipers are not included but we used wipers from Rod Miller. <a ...

    $5.00

  • Control Hose Bracket and Signal Lines: O Scale

    Based on manufacturer’s drawings. You will receive 4 brackets and 16 signal lines. They can be bolted onto the locomotive itself or using some type of easy to make bracket. Most modern locomotives allow for four lines, however, some used three.  See the sample photos. Simply cut off one opening and lightly sand. …

    $6.00

  • Locomotive Ditch Lights: O Scale

    Based on manufacturer’s drawings. You will receive 8 lamp assemblies, enough for two locomotives.  As seen in the accompanying pictures, they can be bolted onto the locomotive itself or using some type of easy to make bracket. The bracket is up to you. A few bits of brass or styrene and you’re done. Also seen here …

    $5.00

  • Air Hose w/Angle Cock & Glad Hand: O Scale

    This resin has some flex and will not crack when pressure is applied. These take paint well after priming. We normally use Mr. Primer Surfacer 1000, but any good thin primer will work.

    12 pieces per package or enough for 6 cars / locomotives.

    <span style="font-family: verdana, geneva, sans-serif; font-size: ...

    $4.00

  • Grab Iron Ends (Rivet): O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Rivet design that attached a hand grab to newer metal cars.

    The stem is .020 and designed for .015 wire. There are 17 parts per sprue …

    $4.00

  • Grab Iron Ends (Nut/Bolt): O Scale

    These small parts will really dress up older Athearn/Reynolds/AllNation cars as well as some new cast cars, and of course, your custom built equipment. These represent the Nut/Bolt that attached a hand grab to a car. The bolt is a scale 5/8″ with the nut 1/8″.

    The stem is .020 and designed for …

    $4.00

  • BUDA No. 30 Clamp Type Steel Bumping Post: O Scale

    The Buda No. 30 track bumper was used on North American railroads. They could be found all over, on customer sidings, yards and more. Our kit includes the clamping parts to attach to the rail. Designed for code 100 track, however, larger codes may be used by removing or filing the pieces. Once glued and ballasted …

    $9.00

  • Deco Box Car Ends: O Scale

    These distinctive ends were used by the C&O and the B&O. Our ends are sized to fit O-Scale InterMountain 1937 AAR box cars.

    Two per package.

    The instructions below show the end being mounted on an An S Scale America 1937 AAR Box Car. …

    $7.00

  • GRS Signal SA1 Head Only Kit: O Scale

    From the catalogs of the General Railway Supply Company the SA1.

    The Type SA Signal produces a powerful signal indication at a minimum of energy consumption due to its scientific optical construction. It is equipped with an elliptical reflector which uses approximately 80 per cent of light emitted by the concentrated filament lamp. …

    $12.00