BUDA No. 30 Clamp Type Steel Bumping Post: O Scale
The Buda No. 30 track bumper was used on North American railroads. They could be found all over, on customer sidings, yards and more. Our kit includes the clamping parts to attach to the rail. Designed for code 100 track, however, larger codes may be used by removing or filing the pieces. Once glued and ballasted in place you will not notice the difference.
Parts come on supports and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts come unpainted.
Check out the PDF below for drawings and a BUDA diagram.
- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. Some minor sanding may be required. Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.
ACC glue works well for all our resin parts.
Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000, but any good thin primer will work.
All parts come unpainted.