Old Trolley / Coach Seats

Old time seats for trolley and early passenger coaches. The end with the armrest faces the isle while the other side is glued to the car side. Set of three parts, seat, armrest and legs.

You will receive 8 seats with supports removed for your convenience.
Also available is a bulk pack for builders containing 40 seats but with supports.

(Builders packs are print on demand and may take a week to ship)

• Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. We suggest wearing eye protection.
  
• Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit.  When sanding we suggest using dust mask and wipe with a moist paper towel so particles don’t become airborne.
• ACC glue works well for all our resin parts. Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000 or Tamiya Surface Primer, but any good thin primer will work. All parts come unpainted.
• Parts must be primed/painted if exposed to sunlight as the resins will continue to cure and may become brittle. Normal indoor florescent tubes and LED lighting should not be an issue.
• All parts come unpainted.