Deco Box Car Ends: O Scale
$7.00
These distinctive ends were used by the C&O and the B&O. Our ends are sized to fit O-Scale InterMountain 1937 AAR box cars.
Two per package.
The instructions below show the end being mounted on an An S Scale America 1937 AAR Box Car. The process in the same for the O Scale InterMountain 1937 AAR Box Car.
The S Scale version is available from Pre-Size Model Specialties
Deco End Instruction- Many of our parts come with supports still attached, and will need to be carefully cut. We always recommend a good sprue cutter for this. We suggest wearing eye protection.
- Parts that have had their supports removed may have some small bumps where the supports were removed that will need to be sanded/filed off for a better fit. When sanding we suggest using dust mask and wipe with a moist paper towel so particles don’t become airborne.
- ACC glue works well for all our resin parts. Parts take paint well after priming. We recommend Mr. Primer Surfacer 1000 or Tamiya Surface Primer, but any good thin primer will work. All parts come unpainted.
- Parts must be primed/painted if exposed to sunlight as the resins will continue to cure and may become brittle. Normal indoor florescent tubes and LED lighting should not be an issue.
- All parts come unpainted.
Related products
-
GRS Signal SA1 Head Only Kit: O Scale
From the catalogs of the General Railway Supply Company the SA1.
The Type SA Signal produces a powerful signal indication at a minimum of energy consumption due to its scientific optical construction. It is equipped with an elliptical reflector which uses approximately 80 per cent of light emitted by the concentrated filament lamp. …
-
RGS Relay Cabinet #3 Kit: O Scale
NEW: Now includes 12 scale foot rod and footing for a complete install!
From the catalogs of the General Railway Supply Company these type of cabinets go back to at least the 1920’s. Used alone for track circuits or crossing and train signals, they were used all over and …
-
MU Housings: O Scale
Based on manufacturer’s drawings. You will receive 8 assemblies, enough for two locomotives. They can be bolted onto the locomotive itself or using some type of easy to make bracket. The bracket is up to you. A few bits of brass or styrene, and you’re done.
- Many of …
- Many of …
-
RGS Relay Cabinet #2 Kit: O Scale
NEW: Now includes 12 scale foot rod and footing for a complete install!
From the catalogs of the General Railway Supply Company these type of cabinets go back to at least the 1920’s. Used alone for track circuits or crossing and train signals, they were used all over and …